Wednesday, October 10, 2012

Liveries: Lancashire & Yorkshire Railway

In one of the early posts on this blog I looked into the liveries of the different railway companies who had, at one time or another, run steam engines into Penistone. In that post I only highlighted the main colour of each livery rather than showing the sometimes intricate liveries in detail. Unfortunately there aren't any/many ready-to-run locomotives available for a number of relevant railway companies and so at some point I might need to re-paint some models. At that point I will need the full livery details. So I'm intending to do a number of posts where I look at a livery in detail, and I'm going to start with those used by the Lancashire & Yorkshire Railway, or L&YR for short.

In the early years of the L&YR a green livery was applied to it's locomotives. I'm going to focus, however, on the black livery which was in use from the 1880's until the L&YR ceased to exist in 1922.

Over the years there were a number of minor variations in the livery, but essentially passenger locomotives were black with red and white lining, while goods engines used just red lining. For example, here is the preserved Aspinall designed, 0-6-0 number 1300 which was in steam at Barrow Hill when I attended Model Rail Live a few weeks ago.


While 1300 was built in 1896, it is currently painted in a variation of the livery which became standard sometime after 1904 when George Hughes took over as the Chief Mechanical Engineer. Prior to this time the two white lines were of different thicknesses (the inner one being thinner).

As I mentioned earlier, goods engines were lined slightly differently with just two red lines. You've actually already seen this livery on an OO Gauge model in the Docker's Umbrella post, but to the left you can see it in use on preserved L&YR locomotive number 752.

This locomotive was originally built as an 0-6-0 tender locomotive in 1881 but was converted to a saddle tank in 1896 (it would originally have looked similar although not identical to 1300). Given it's poor state of repair (it's missing it's connecting rods) it's unclear how accurate the livery is. The red lining appears accurate but there are a couple of anomalies. Firstly the green background to the makers plate originally denoted which company had built the locomotive (Beyer Peacock & Co in this instance) so as to know who to contact when for repairs or spare parts. From the 1890's, however, all makers plates were painted black. Also none of the photos I can find of similar locomotives show the company crest on the side of the cab.

While these two locomotives show most of the livery details quite well you can see a number of other examples (including carriage liveries) on the website of the Lancashire and Yorkshire Railway Trust.

1 comment:

  1. Another case of simplicity being so effective. I think back to the days of Crosville, Liverpool Corporation and Birkenhead Corporation busses which maintained a standard livery for decades and thus became iconic. Liveries seem to change at the drop of a marketing man's fees these days. I'm not convinced that it's always - perhaps even, often - a good idea.

    ReplyDelete