Thursday, July 2, 2020

10HP Baguley: Step 4

Right, let's have a look at step 4 of the instructions which read:

Take the front cab and bend the sides to 90°, attach to the footplate. Add the front making sure it lines up perfectly with the hole, followed by the sides.
Having read the instructions I decided to pretty much ignore them and go my own way. I decided that I'd probably find it easier to build up the front cab wall before attaching it to the footplate. I started by laminating the front overlay on to the cab before bending the part to shape.


No clever tools this time, just a cocktail stick and a scrap of wood to hold the two parts in alignment while I soldered them together. A little bit of cleanup where solder had leaked from the edges and the part looked perfect.

With the front overlay in place I carefully bent one side to 90° and then soldered on the overlay, before repeating the process for the second side overlay.


As you can probably guess the main issue with adding the side overlays was how to hold the parts while soldering. Folding just one side and the part is easy enough to tape to a piece of wood. With both sides folded this is more complex, but using an old wooden clothes peg worked really well. A little more cleanup and it slotted easily in to the footplate and could then be soldered into place to finish this step of the build


It may need a little filler on the corners but in real life it's less of an issue than in the cruel close up photo. Either way I'm happy with that and it didn't involve accidentally unsoldering anything from steps 1 to 3.

2 comments:

  1. I'm beginning to think that I should build one of these!

    ReplyDelete
    Replies
    1. I think it's a kit you'd enjoy. I think NP are out of stock at the moment as we ran out of etches during lockdown. The etcher is back working again so hopefully more stock will appear sooner rather than later.

      Delete