By The Devil, It's Big!

If you remember back a few months the initial motivation behind the 16mm scale Hudson Hunslet model came from a request to simply "scale up" the 4mm scale version I'd previously built. Well now I've finished it we can have a look at the two models side by side...

As you can see the 16mm scale version is an absolute monster in comparison! Either that or the 4mm version really is ridiculsouly small. To be fair I think both things are actually true.

If you've not been following along over on YouTube then there is a 25 part playlist documenting the iterative process to go from the 4mm version to the 16mm one which you might find interesting if you want all the gory details. If you just want the highlights then enjoy...

And if you want to build your own 16mm scale model then I'm making the 3D printed parts and the metal cowl available as a scratch aid kit. Full details are in the video and there is a link to a contact form in the video description where you can register your interest in one.

Metal Forming

I've just realised that I've not posted any if the video updates on the 16mm Hudson-Hunslet project to the blog recently. Hopefuly you are all subscribed to the YouTube channel so have seen them already but if not then there are three new episodes to bring you up to speed all of which revolve around metal shapes and metal forming.

Magnetic Side Panels

A short update on the 16mm scale Hudson-Hunslet build involving the side panels and some tiny magnets

Broken But Moving

It's taken a while (work and family commitments meant not much time for modelling) but U've finally got a little further with the 16mm scale build of the 24hp Hudson-Hunslet diesel loco.

Feet in the Footwell

Two videos in todays post, both of which are about finally sorting the footwell problem

Dots Per Inch

I now know why the paper test "etches" didn't fit properly...

Large Scale Progress

Having introduced the idea of building a 16mm scale version of the 24hp Hudson Hunslet in the previous post, I've now done a small amount more work. Specifically I've managed to print a chassis that will hold the wheels and motor.... although due to a slight design flaw it won't fit on the track yet! Rather than lots of text explaining things, and because no one complained about the last video post I did, here is the current state of play

Gauge Adjustable

So I think I've now got the 16mm scale chassis from I P Engineering back to where it was before it suffered from rust. As well as painting it (to stop the rust reoccuring) I've also made some modifications and while I could write about them I thought I'd try something new and have shot a short video where I talk through the changes I've made.

I don't really like the sound of my voice when I hear it back, so I don't think this will become a frequent occurance, but it would be great to know what people think about the video and if they think I should do more posts like this.

As Seen In...

Some of you may remember that back in December I completed the I P Engineering kit of a 16mm scale Hudson Skip locomotive. At the time I didn't go into too many details about how I'd built and detailed the kit, this wasn't for any good reason, other than I'd not written anything down. Well now I have and the results are a four page article in the April issue of Garden Rail magazine.

One of the people who read the original post was Phil Parker (if you don't already read his blog then you should) who suggested the editor of Garden Rail would like an article on building such a kit, and he should know given he's the editor of Garden Rail! So over the Christmas holiday I put together a quite detailed article on the build and all the extra detailing, including how I built a rivet press. So if you want the gory details go buy a copy.

Buying a copy of this article is much easier than all the previous articles I've ever written (either railway related or work related) as Garden Rail is sold on the high street so, for example, you can walk into your local WHSmith and pick up a copy. I got sent a copy, but I might even go buy an extra copy just for the thrill of it.

The Big Reveal

Having hinted at some modelling in a new scale for the last couple of weeks, the time has finally come for the big reveal. So without further ado we have a 16mm Hudson Skip locomotive that runs on 32mm gauge track.

The loco is built from a kit from I P Engineering that consists mostly of laser cut plywood, although the skip itself is an injection moulded piece. You should also be able to spot the hand brake wheel and clutch pedal from previous posts, plus two gear levers and some extra rivets (possibly more on those in a later post) that I've added to the basic model. All these bits were modelled on a drawing of a similar loco in issue 9 of Narrow Gauge and Industrial Railway Modelling REVIEW.

Unlike any other locomotive model I've built before this one is battery powered rather than being powered through the track. It's also why the skip looks over full as that's the smallest mound I could make and still hide the batteries and on/off and direction switches.

One of the advantages of battery power is that I don't need expensive track to run the loco on. In fact I can use track that is also made from lasercut plywood, specifically the Ezee range of track also from I P Engineering.

As I mentioned in an earlier post the aim of this little bit of modelling was to give me something I could do in the lounge after the little one was in bed but also to see how much I liked 16mm as a scale to work in without spending a lot of money. I think I've achieved that as (barring paints, glue, etc.) the loco, driving figure and track has cost me just £80 and I've had a lot of fun, and enjoyed scratch building details in this larger scale. Which just leaves the question.... will I be doing more 16mm scale modelling? At the moment I'm not sure. I don't have the space inside the house for much more than that temporary oval of track and I've not thought about modelling in the garden..... yet.